Hypro Diaphragm Pump - D250

Low cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs. Pressure and output are designed for optimum performance of medium to large sized sprayers. The D250 has 6 Diaphragms: 66 gpm; 290 psi.

Pressure and output are designed for optimum performance of medium to large sized sprayers.

This sprayer can be adapted for splined shaft, couple shaft, and solid shaft drive option.

The Hypro D250 diaphragm pump is designed to be the most complete pump for the spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids.

This Hypro diaphragm pump offers a wide spectrum of flows and pressures for slurries and suspensions.
The oil bath design and premium-quality, synthetic diaphragms provide longer life and greater reliability. Low-cost maintenance and almost wear-free operation result from these diaphragms,as well as, a self-priming operation, and visual oil-level sight glass.

This Hypro D250 diahpragm pump can handle fluids up to 140 degrees F and can be run dry. Easily adaptable to PTO, hydraulic or gas engine drives.

• Max. flow: 66 gpm/ 249.6 L/min
• Max. pressure: 290 psi/20 BAR
• Max. rated speed: 550 rpm
• Max. fluid temperature: 140 degrees F
• Shaft: 1 3/8" - 6" splined male thru-shaft
• Port sizes: 2" inlet, 1 1/2" outlet, hose barb
• Diaphragms: 6, semi-hydraulic
• Housing components for liquid handling: epoxy-coated
• Mounting base: included
• Pump shaft rotation: CW and CCW

Click to BUY 9910-D250 Diaphragm Pump - $2268.95

Select the desired pump series:

Roller Pumps
1500/6500 | 1700 | 7560 | 7700 | 4001
Kits/Couplers/Adapters | 4101-EH Electric Motor Driven Pump
Centrifugal Pumps
Ace Centrifugal Pumps | Hypro Centrifugal Pumps | Poly Centrifugal Pumps |
Banjo Centrifugal Pumps
Diaphragm Pumps
D12 | D30 | D50 | D70 | D115 | D135 | D160 | D250 | D252 | D303
D403 | D503 | D813 | D1064 | D1265 | D1516 | Piston Pumps |
Banjo Pumps
Self-Priming Pumps | Wet Seal/Stainless Steel Pumps